This is the page for something Special, Rare, One-of-a-kind, Limited Edition
and Discontinued items for Collectors Up 11/29/11! Added ATHRO Sommelier Knives, HIRO Bushman's Machete and smaller version
of Mr. Nagao High-end Custom Higonakami
New! ATHRO Sommelier Knife
HW-10 Sommelier Knives This is a professional Bartender's and Waiter's Tool, and also a
must for wine lover at home. Sturdy & Hardened Stainless steel Corkscrew,
Leverage Arm and Bottle foil Cutter/Cap Lifter are compactly folded into
solid Nickell silver Handle with Exotic wooden inlays of Maple Burl, Cocobolo,
Ebonywood or Japanese Tagayasan wood with Brass liners. 4-5/8" (120mm)
S-shape hand polished and rounded handle, and weight 100g. Each in a gift
box.
Your choice of 4 different wood inlays (refer to the right above photo)
HW-10A Cocobolo Wood (Left Top) JKD Special $94.00 3 pcs. Available Now
HW-10B Ebonywood (Left Bottom) JKD Special $94.00 3 pcs. Available Now
HW-10C Tagayasan wood (Right Top) JKD Special $94.00 3 pcs. Available Now
HW-10D Maple Burl wood (Right Bottom) JKD Special $119.00 3 pcs. Available Now
New! HIRO Original Bushman's Machetes
HIRO Bushman's Machete Since introducing HIRO Machete Jungle Knife (shown below), we have instantly
sold out all the knives in stock at Hiro factory for it's durability and
functions you can depend on in any hard situaions. Due to the large minimum
in new production, we had to give up the new production. However, we are
still receiving many inquiries and requests to make it available again.
We are looking at the possibility of any smaller minimum production, even
at a bit higher price, and hoping this will happen some times in 2012
Meanwhile, we would like to offer HIRO Bushman's Machete from same maker
and heavy duty quality. The blade is made of VG-2 core edge forge clad
(San Mai) with blakened and Tsuchime hammered stainless steel, Full tang
and hand contoured beautiful Cocobolo wood handle with brass tubular pins
and lanyard hole on end. Comes with double stitched custom Leather sheath.
Available in two different blades for your specific need
VG-2 San Mai blade in 5.2mm thick, 225mm blade, 380mm overall Weight 610g
JKD Special $209.00 Available Now
HIRO Machete Jungle Knife, as seen in Discovery Channel
HIRO Machete Hiro has been producing fine quality Outdoor knives and tools
for decade in Seki with a concept of "Ecology Peace in Outdodor Mind". Recently,
their Machete knife has been featured in the "Discovery Channel =
Beyond". The Survival Expert, Myke Hawke has used this Hiro Machete
as the most valuable Survival Gear in Jungle. Please take a look at
Discovery Channel (Jungle Survival Tips = Survival Zone :
Jungle : Machete)
13-inch Heavy duty AUS-6 Chrome-Vanadium Stainless steel blade with hollow
ground recurved edge toward wider tip for powerful penentration and weight
balance. 6-1/2" Full tang oversized Black Zytel handle assures
firm and comfortable grip, even with gloves. Comes with black Cordura Nylon
sheath with belt loop and strap
9/09/10 Up! Just received a customer's feedback:
Thank you for your fully professional delivery. As always I can count on
JKD in terms of correctness of delivery and overall quality. Hiro Machete
is truly a serious gear for extreme travellers and will be very useful
for those who seek best "friend" not only in the jungle but all
kinds of forests. With Hiro machete it is possible to replace a big knife,
an axe and other tools. It is not too heavy, has good balance, good, an
easy to sharpen stainless steel, long handle and is very universal. I will
use it during my canoe, ATV, off road 4x4 and other trips. And Hattori
Higonokami set is a must for knife collectors, so I will make my own HIGONOKAMI
as well. From Marcin Morawski, Poland
Sorry, this model is out of stock, but we are negotiating to produce more
in 2012.
Mcusta DDS-170 "SAKURA" (桜) Scissors
DDS-170D "SAKURA" Damascus Scissors Mcusta brand knifemaker, Marusho Industry in Seki is also producing
fine quality and precision scissors and shears under the "SILKY"
brand for domestic market for decades. They have been challenging to make
VG-10 Damascus Scissors like their Mcusta knives for last 3 years, which
was a really difficult work how to bring out the Damascus patterns on whole
surface. Finally, they came up with the limited quantity of just 10 pieces.
Idon't know yet if they make more in future on this difficult and time-consuming
handmade Damascus scissors, but I wanted to offer this limited quantity
to our JKD cusomers first.
3" VG-10 core edge forged with 32 layer Stailess Damascus steel blade
and 3" same Damascus handle with "Sakura" (Cheery blossoms)
design cut-out on the tang. Overall length 6-3/4". Each in a Kiri
wooden gift box. Rare Collector item or Very Special Gift.
New DDS-170 "SAKURA" Scissors After having sold out the limited
10 pcs.Damascus Scissors instantly, we had many requests to make more,
but unfortunately,
New DDS-170 "SAKURA" Scissors After having sold out the above limited 10 pcs.Damascus Scissors instantly,
we had many requests to make more, but unfortunately, Marusho is not willing
to make it again. Instead, they have made some non-damascus version out
of the AUS-6 stainless steel with "Sakura" design etching. Bautifull
and Precision made Scissors on your den. Each in Kiri wood display box
New! Higonokami Collections
(肥後守)
Japanese Tradition Slip-Joint Folders
Original Mini Higonokami from
Nagao
Higonokami is the Japanese traditional knife used by everyone since small
school ages for sharpening pens to hobby crafts. Here are the collections
from the original traditional to modern ones
While the supply lasts, we will include a free gift of the Original Nagao Mini Higonokami with each Higonokami order (Sorry, all gone now)
Mr. Goto Custom Made Higonokami
Goto Higonokami Custom made by Mr. Kei Goto. We have introduced Mr. Kotoh's custom
Higonokami from the 2009 Seki Knife Show and have sold out his 10 pcs.
Higonokamis as shown below. At the 2010 Seki Knife Show, I found a very
similar Higonokami Folders made of VG-10 Damascus blade and Ironwood Handle,
but with a Nickel Silver pin inlay work for "Sakura" (cherry
blossoms) design on both sides of handle, and comes in two sizes and two
different handle materials. Mr. Goto is a friend of Mr. Kotoh from same
Kyushu island.
GH-10I Higonokami, Ironwood, Small 2-1/8" VG-10 core forge layered Stainless Damascus steel blade with
selected Dessert Ironwood handle, polished and coated to avoid cracking,
discoloring and watering. Unique Nickel Silver Pin inlays on both sides
of handle. Leather lanyard on end. 3" closed. Comes with custom crafted
Leather pouch with Carabineer belt hook.
GH-20Q Higonokami, Quincewood, Large Same as above, but with Quincewood Handle
JKD Special $220.00 2 pcs. Available Now
GH-30I New Higonokami, Ironwood, This is the new wider handle and wider blade model of GH-20 Higonokami
Large, without pin inlay work on handle. 2-7/8" VG-10 core forge layered
Stainless Damascus steel blade with selected Dessert Ironwood handle, polished
and coated to avoid cracking, discoloring and watering. Leather lanyard
on end. 4" closed. Comes with custom crafted Leather pouch with Carabineer
belt hook.
GH-30Q Higonokami, Quincewood Same as above, but with Quincewood Handle
JKD Special $220.00 3 pcs. Available Now
Mr. Nagao Hand Forged Higonokami
MN-10 Original Nagao Higonokami
Hand-forged by Traditional Blacksmith, Motosuke Nagao. This is an
original Higonokami, still made in same old traditional way as 100 years
ago. Miki's 78 years old Blacksmith, Mr. Motosuke Nagao is the 4th
generation, and the only one existing maker of this original Higonokami
now. This is his high-end model of 4" Aogami (Hitachi Blue carbon
steel) core edge forge layered Damascus steel blade, 5-1/8" Brass
handle engraved with his signature and trade mark and his famous Tiger/Bamboo
design. Comes with wooden Kiri box with his signature in caligraph and red Rakuin.
Aogami Damascus blade in 4.5mm thick, 100mm blade, 220mm overal in openl,
Weight 100g
JKD Special $164.00 Available Now
This is for size comparion of MN-10 Large and MN-20 Small
NEW! MN-20 Original Nagao Higonokami, Small This is a new smaller version of MN-10 with 3-1/8" Aogami (Hitachi
Blue carbon steel) core edge forge layered Damascus steel blade, 3-3/4"
Brass handle engraved with his signature and trade mark and his famous
Tiger/Bamboo design. Comes with wooden Kiri box with his signature in caligraph
and red Rakuin
Aogami Damascus blade in 4.5mm thick, 80mm blade, 180mm overall in open,
Weight 70g
JKD Special $134.00 Available Now
Mr. Saji Hand Forged Higonokami
New Aogami Super (Blue steel Super)
Traditional Higonokami Foldrs from Takeshi Saji, Echizen
Forgesmith & Traditional craftsman. Hitachi Aogami Super (AS
Carbon steel) of the core edge is an ultimate Hagane
refined from Yasugi sand-rons with high carbon (1.40
– 1.50), Chromium (0.30
– 0.50) and Tungsten (2.00 – 2.50) added for extra durability and
longer edge retention, clad with layered Damascus steel. The
handle is availble in a beads blasted Brass, Copper and
Aluminum. Comes with brown leather
pouch.
Aogami Super core layered Damascus blade in
3.2mm thick, 80mm blade, 180mm
overall
Your choice of handl material (From Top
on the above photo)
SH-10 Brass Handle (weight
75g) Retail $168.00 JKD Special
$126.00 Available
SH-20 Copper
Handle (weight 80g) Retail
$168.00
JKD Special $126.00 Available
SH-30 Aluminum Handle
(weight 60g) Retail
$168.00
JKD Special $126.00 Available
At the Seki Knife Show, Echizen
Forgesmith & Traditional craftsman, Mr. Takeshi Saji came
to me to show his new collection of Higonokami (he calls it
"Echizen-no-Kami) made of entirely Nickel/Stainless steel
Damascus. Of course, the blade core edge is VG-10 (San Mai
Clad). These are very unique Higonokami folders, and the
sandblasted Damascus design gives it very traditional
and old fashion. It comes with five (5) different blade shapes
and black Leather pouch. Bold Brass pivot pin and stainless
steel washers.
Your choice of blade type (From Right to
Left on the above photo)
HIGO-2
Kiridashi type Retail
$210.00
JKD Special $157.00 Availble Now
HIGO-1
Clip type Retail
$210.00
JKD Special $157.00 Sold
Out
HIGO-3 Drop point
type Retail $210.00 JKD Special
$157.00 Available
HIGO-4 Boot Knife
type Retail $210.00 JKD Special
$157.00 Sold Out
HIGO-5 Upswept type
Retail $210.00 JKD Special $157.00 Available
HIRO 9-pc. Wood Carving Knife Set
HR-701
At the Seki Hamono-Kobo (Knife Workshop), we have showcases to
display some representative products from various knife
makers in Seki. We had many visitors to buy knives at the
Custlery Festival. One of the items they showed interest and
wanted to buy from the showcases was the Hiro 9-pc. Wood
Carving Knife.
It comes with 9 different tools of 2
different size Kiridashi knife, 1 pen blade knife, 4
Shokoku-To (carvers) of 2 round, 1 triangle and 1 flat, 1 Saw
blade and 1 File. These blades are made of High Carbon steel
V-Toku#2 and Teakwood handles. Each tool is neatly
stored in the pocket of Canvas Cloth Roll Bag and Gift
Boxed with Instruction sheet.
JKD Special $138.00 Available Now
Old BlackJack Knives in Mint Condition for
Collectors
No Gimmicks... Just
Performance
During the years of
1987 to 1990, Blackjack knives have been designed by
Mike Stewart and produced in Seki, Japan. I was deeply
involved with all Japanese production before they went
to bankruptcy. I have recently found some old Blackjack
knives at the factories, and would like to offer them
for Blackjack collectors. Since original Japanese
production was very small quantity per model, it is hard
to find in the market and is now becoming a rare
collector model. You can get Blackjack information
at some forums, www.KnifeForums.com ,
www.BlackjackKnives.us
etc.
New! Blackjack
FM-II Folding Mamba
BJ-80 FM-II Folding Mamba II This is a custom hand made replica
of the Folding Mamba, the first Folder from Blackjack
introduced in late 1967 as the strongest and hadiest
tactical folders in the market. Mr. Seizo Imai was involved
with this production at his factory in Seki, stating with
Kraton handle to Micarta, Cocobolo and Stag handle versions,
and they were the best sellers in Blackjack line. Over 40
years now, Mr. Imai is now an individual custom knifemaker and
is making various famous models replicas such as Loveless,
Horn, Centofante in fine details and precision work. You can
see his craftsmanship at Imai page. I have recently
asked him to make some custom made replicas of Blackjack
Folding Mambas, and he has hand made 3 pcs. each of four
different handles in exactly same size and shape, but with
upgraded ATS-34 blade instead of AUS-8 originally used. This
will be a good addition to your Blackjack
collection!
Folding lock back knife, 3-1/4" fine
brushed (hair-line) ATS-34 stainless steel recurved blade with
large false edge on back and thumb opening stud, 4-1/4" handle
with fine brushed (hair-line) solid Nickel silver bolster and
liners. 7-1/2" open. Weight 130g. Your choice of handle
materials available in Stag, Quincewood, Jiggedbone and
Camelbone.
FM-II-Q Quincewood
handle JKD Special
$345.00 Only 2 pcs. Available Now
FM-II-C Camel Bone
handle JKD Special
$345.00 Only 2 pcs. Available Now FM-II-S Sambar Stag
handle JKD Special
$345.00 Sold Out
FM-II-J Jigged Bone handle
JKD Special $345.00 Only 2 pcs. Available Now
BJ-60 Blackjack Blackmoor
Dirk
BJ-60 Blackmoor Dirk
This is a smaller version of BJ-150 Tartan Dirk.
This was originally made first, and used for Blackjack logo
mark. Blackjack and famed custom knifemaker Pat Crawford
have created this "Fatal Beauty" series in the traditon of
these ferocious Celtic Warriors. 6-inch heavy duty
double edged AUS-8 blade, Concave hollow ground back
with thumb dimple on the tang. 4-3/4" Black Kraton
rubber checkered handle with solid Stainless steel hilt.
Comes with black leather sheath. Original knife, sheath
and box.
BJ-150 Tartan
Dirk 8-1/2" heavy duty double edged AUS-8
blade with partial serrations, Concave hollow ground back with
thumb dimple on the tang. 5-inch Black Kraton rubber
checkered handle with solid Stainless steel hilt. Comes
with black leather sheath. Original knife, sheath and
box.
BJ-220 Blackjack
Warner-Moran Rio Grande Camp Bowie
Knife
This is the reproduction model of a Rio Grande Camp
Bowie made for Ken Warner in 1967 by Master Bladesmith Bill
Moran. It was made as exact to the original as possible, using
CS-51 Carbon steel with a full height Moran style convex
ground edge. The full tang construction with hand contoured
and hand fitted Honduran Rosewood handle with brass pins
and brass double hilt. 9-3/4" blade and 5" handle.
Comes with double stiched custom leather sheath. Original
knife, sheath and box
MK-01K Renaissance This is the reproduction of Moki's flagship knife on their company
logo. Moki has been producing precision factory custom knives over 100
years since 1907. They have recently reproduced their flagship folders
in a limited quantity. Old fashioned slip-joint Pocket knife with 2-1/2"
AUS-8 satin finished blade with false edge and nail nick and 3-1/4"
Cocobolo wood handle with solid Nickel silver bolsters (front and end)
with Nickel silver shield, pins and liners. Precision Snap spring action.
Comes with pocket pouch and gift box. A Must for Moki Collectors
MK-100EG "PLIANT ARROW" Moki's Famous smooth
and precision action, Folding Lock Back Knife, 3" High Mirror
polished AUS-8 Molybdenum/Vanadium Stainless steel blade in
2.8mm thick, 4" selected MOP Handle with Abalone Arrow , and
brushed solid Stainless steel Bolster and brass liners.
7" open length, Weight 80g, Comes with Black Nylon
web pouch with leather Moki logo
patch
Retail $168.00
JKD Special $119.00 Available Now
MK-101EG
" GLORY ARROW"
Smaller version of 2-1/2"
High Mirror polished AUS-8 Molybdenum/Vanadium Stainless steel
blade in 2.5mm thick, 3-1/4" selected MOP handle with
Abalone Arrow inlay , and brushed solid Stainless steel
Bolster and brass liners. 5-7/8 open length, Weight
50g, Comes with Black Nylon web pouch with leather
Moki logo patch
MK-810IL "LEAF,
Iron Wood" Cute and Elegant Folder for your
pocket, purse or keyholder. Folding Lock Back Knife, 2"
High Mirror polished VG-10 Cobalt Stainless steel blade in
2.0mm thick, 2-3/4" Desert Ironwood Handle with MOP/Abalone
Leaf inlay , and brushed solid Nickel Silver Bolsters and
liners with keyring. 4-3/4" open length, Weight only
30g, Comes with dark green
linen pouch
Retail $168.00
JKD Special $119.00 Available Now
MK-810EL "LEAF,
MOP" same as above, but MOP
handle
MK-502 "BLOSSOM" Another precision inlay
work from MOKI of 3 rare yellow MOPs on the mirror polished
solid SUS410 stainless steel handle. Folding Lock Back
Knife, 2-3/4" High Mirror polished ATS-34 Stainless steel
blade in 2.5mm thick, 3-3/4" closed and 6-1/4" open.
Weight 50g, Comes with dark green
linen pouch
Retail $270.00
JKD Special
$189.00 Available Now
MK-610J "KITA-KITSUNE" Satin polished
solid SUS410 stainless steel handle with Quince wood
inlay. Folding Lock Back Knife, 2-1/2" High Mirror
polished AUS-8 Stainless steel blade in 2.2mm thick, 3-1/4"
closed and 5-3/4" open. Weight 35g, Comes
with brown
leather pouch
MK-100J "PLIANT" Moki's Famous smooth and
precision action, Folding Lock Back Knife, 3" High Mirror
polished AUS-8 Molybdenum/Vanadium Stainless steel blade in
2.8mm thick, 4" Quincewood Handle with brushed solid Stainless
steel Bolsters and Brass liners. 7" open length, Weight
80g, Comes with Black Nylon web pouch with leather
Moki logo patch
MK-633CRZ "ARES" Moki's Famous smooth and
precision action, Folding Lock Back Boot Knife, 2" High Mirror
polished VG-10 Cobalt Stainless steel blade in 2.3mm
thick with long false edge on back, 3-1/4" Jigged Strawberry
Bone Handle, and brushed solid Stainless steel Bolsters and
liners. 5-3/4" open length, Weight 50g, Comes with
Linen pouch
Moki has discontinued this model (No more
produced)
SPECIALS 
